Perfect surface finish
– Excellent atomization
– Homogeneous distribution
– Excellent penetration into corners and body shells
– High film thicknesses are quickly achievable
Optimal adjustment to the application
– Internal or remote fan-control
– Standard and robot base plate for single and twin guns
– Large range of air caps, nozzles and accessories
Environmentally friendly
– Long service life
– Low material consumption
– Extremely little overspray
– Minimal contamination of the surroundings
– Reduction of the VOC emissions
Versatile in use
The SupraCoat guns allow the application of a wide spectrum of materials and thus extremely flexible production.
– 1 & 2 component water based and solvent based paints
– Metallic paints
– High solids paints
– High viscosity paints
– Release agents
* In the case of the GA 3000SCEC Robot Twin model the atomizing air pressure must always be at least 14.5 psi smaller than the control air pressure at the air valve.
Max Air Pressure (psi) |
N/A 87 |
Max Material Pressure (psi) |
N/A 116 |
Control Air Range (psi) |
N/A 58 - 87 |
Weight (standard variant) oz |
N/A 136.8 |
Max Temp Material (F) |
N/A 176 |
Max Temp Air (F) |
N/A 230 |
Ambient Temperature (F) |
N/A 41 - 104 |
Sound Level @ 87psi air and 116psi material pressure |
N/A 82 |
Certifications
