LIGHTING FEATURES

Bright full booth illumination is provided by eight, four-tube, 48", 32-watt fluorescent light fixtures in the angled ceiling panels and side walls. Each light is mounted behind clear tempered safety glass and sealed with gaskets. All fixtures are UL listed and approved for their intended use and placement.  Note: The light tubes are not furnished with the fixtures.

 

CONSTRUCTION FEATURES AND QUALITY STANDARDS

All booth walls and plenum sections are made with18-gauge galvanized steel. All product and personnel access doors are double skinned for ease of maintenance and treated for noise control.  Brixon™ safety latches are provided for each door opening.  Classic Crossdraft Booths are rigidly reinforced with external “I” beam construction.

 

Exhaust is provided by a 30" diameter tubeaxial fan with a 3HP, three-phase motor. Optional NEMA 12 Control Panel is available. Other electrical components may be purchased separately. All hardware, filters and sealants needed for the booth installation are included.

 

Spray Booth products comply with all OSHA and NFPA regulations.

Unit of Measure

Interior Width

N/A 14'-0"

Interior Height

N/A 9'-0"

Interior Length

N/A 28'-0"

Overall Width

N/A 15'-0"

Overall Height

N/A 10'-0"

Overall Length

N/A 28'-4"

Entry Door Width

N/A 9'-4"

Entry Door Height

N/A 8'-10 1/2"

Entry Door Qty/Type

N/A 1 - Solid

S&G Lights

N/A 1

Open Lights

N/A 7

Total Lights

N/A 8

Air Flow

N/A 12,600 SCFM

Fan Diameter

N/A 30 in

Exhaust Fan HP

N/A 3

Intake Filters

N/A 24

Exhaust Filters

N/A 24

Manufacturer

N/A COL-MET

Certifications