ILLUMINATION

Lighting is provided by four Class I Division II, 48" long, fluorescent, 32 Watt, T-8 type fixtures (four-tube), mounted behind safety glass; appropriately sealed from the interior of the spray booth. All fixtures are UL listed and approved for their intended use and placement.  NOTE: Lexanroof panels may be substituted for the light fixtures.

 

PURGE CONTROL

This feature assures the safe operation of the coatings enclosure, by maintaining the airflow at design levels. During operation overspray powder accumulates on the cartridge filters.  As the cartridge filters load, airflow decreases and negative pressure rises within the air handler. A timer activates a system of air purging valves that clear the cartridge filters of accumulated powder to ensure maximum filter life.

 

SAFETY EQUIPMENT

• One (1) Air Interlock Solenoid Valve is provided with this booth.

• Flame/Spark Detection (if required) will be provided by others.

 

COLLECTOR MODULE

• Factory Assembled Painted 10 Gauge Mild Steel Construction - insulation installed for sound attenuation

• Spark-proof Construction Plug Type Fan

• Pulse Valves and Solenoids

• Rollaway Filter Module with Fluidized Bed

The use of Rollaway Filter Modules allows for a quicker color change since the filter section does not have to be cleaned between color change outs.

 

• Primary Filter Modules: Clark™ Filter #1566093 (or equal) - 12.75" dia. X 52" long

• Final Filter Modules: Airguard Variflow™ (or equal) - 24" X 24" X 12"

   

AVAILABLE OPTIONS

• Additional Rollaway Filter Module with Fluidized Bed (includes 1 set of filters)

• Cabin Upgrade to 18 gauge #304 Stainless Steel

• Floor & Base Assembly Upgrade to Formed 12 gauge #304 Stainless Steel.

• Roll-off Base Assembly

• Air Package - includes plumbing to fluidized bed & four regulator air manifolds

• 110V Electrical Outlet in Control Panel

 

Col-Met Spray Booth products comply with OSHA and NFPA regulations.

Note: Standard Entry/Exit Vestibules are 24" long.

Unit of Measure

Interior Width

N/A 5'-0"

Interior Height

N/A 8'-0"

Interior Length

N/A 14'-0"

Part Opening Width

N/A 3'-0"

Part Opening Height

N/A 6'-0"

Operator Access (Auto)

N/A 2

Operator Access (Manual)

N/A 2

Total CFM

N/A 7,000 at 4.5" SP

Manufacturer

N/A COL-MET

Certifications