The Classic Auto/Truck Crossdraft Booth draws fresh air through filters in the product entry doors. The clean filtered air is drawn through the booth and exhausted through a filter system at the opposite end. This type of spray booth makes efficient use of shop space and is available in solid-back, drive-through and reverse-flow designs.  Reverse-flow booths draw intake air through filters in the back wall. The solid-faced product entry doors are at the exhaust end of the booth.  This provides cleaner intake air filtering and better control of shop dust that might be tracked in at the vehicle entrance.  The booth can be equipped with an air replacement unit (makeup air) and cure cycles to meet your painting requirements.

The Classic Auto/Truck Crossdraft Booth draws fresh air an air supplied plenum near the product entry doors. The clean filtered air is pressure fed through the booth and exhausted through a filter system at the opposite end. This type of spray booth makes efficient use of shop space and is available in solid-back and drive-through designs.  The solid-faced product entry doors are at the exhaust end of the booth.  This provides cleaner intake air filtering and better control of shop dust that might be tracked in at the vehicle entrance.  The pressurized crossdraft booth is equipped with an air replacement unit (makeup air) and cure cycles to meet your painting and curing requirements.

The Side Downdraft intakes air from the cleaner upper levels of the shop through a filter bank in the booth ceiling. The filtered air is drawn down and away from the vehicle through exhaust filters at the floor level, along both sides. This provides efficient overspray control that reduces prep time and also provides a much healthier workplace environment without the expense of a concrete exhaust pit. When purchased as a pressurized unit, the booth can be equipped with an air replacement unit (makeup air) and heated cure cycle to meet your requirements. It is available in both drive-through and solid-back designs.

• HEAVY DUTY CONSTRUCTION

• ANGLED TOP LIGHTING

• QUALITY DESIGN OPTIONS

The Pressurized, Side Downdraft booth intakes air from a heated, makeup air unit through a filter bank in the booth ceiling. The filtered air is drawn down and away from the vehicle through exhaust filters at the floor level, along both sides. This provides efficient overspray control that reduces prep time and also provides a much healthier workplace environment without an expensive concrete exhaust pit. When purchased as a pressurized unit, the booth can be equipped with an air replacement unit (makeup air) and heated cure cycle to meet your painting requirements. It is available in both drive-through and solid-back designs.

• HEAVY DUTY CONSTRUCTION

• ANGLED TOP LIGHTING

• QUALITY DESIGN OPTIONS

The Pressurized, Pit Downdraft booth intakes air from a heated, makeup air unit through a filter bank in the booth ceiling. The filtered air is drawn down and away from the vehicle through exhaust filters in the floor located in a concrete pit or steel basement. This provides efficient overspray control that reduces prep time and also provides a much healthier workplace environment for those desiring a centralized exhaust system. When purchased as a pressurized unit, the booth can be equipped with an air replacement unit (makeup air) and heated cure cycle to meet your painting requirements. It is available in both drive-through and solid-back designs.