Miniature automatic spray gun for the most delicate spraying jobs

Body: stainless steel.

Round-jet nozzle inserts available:

0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm ø V 20 305 51 . . 3

Wide-jet nozzle inserts available:

0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm ø V 20 305 01 . . 3

Spray gun particularly suited to coating inner pipe surfaces.

The circular-shaped spray jet is produced by a special disk nozzle.

The gun is made entirely of stainless steel.

Available nozzle sizes:

0.5 mm / 1.0 mm / 1.5 mm ø V 20 380 51 . . 3

This compact spray gun is ideally suited for use with robots. The gun body is made of hard-coated aluminum. Wide and round-jet are controlled externally. Large nozzle range with only two air cap sizes. Nozzle and needle: stainless steel.

Wide-to-round-jet nozzle inserts available:

0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 / 1.8 / 2.0 / 2.2 mm ø

V 20 310 02 . . 3  PILOT WA 100: standard version (for conventional spraying)

V 20 311 02 . . 3  PILOT WA 100: standard version – flushable

V 20 312 02 . . 3  PILOT WA 100: standard version – stainless steel gun body

V 20 312 10 . . 3  PILOT WA 100: recirculation version - stainless steel gun body

V 20 313 02 . . 3  PILOT WA 100-MD: medium pressure version

Recirculation versions available on request.

Small automatic spray gun for the finest surface finishes. Internal control feature opens and closes the atomizing air input. Material volume regulation through notch-type fine adjustment. All wetted parts: stainless steel.

Wide-jet nozzle inserts available:

0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 / 1.8 / 2.0 / 2.2 mm ø

V 20 600 02 . . 3  PILOT WA 600: standard-version (for conventional spraying)

V 20 601 02 . . 3  PILOT WA 610-HD-U: standard version for recirculation systems

V 20 607 04 . . 3  PILOT WA 625-MD: medium-pressure version

V 20 608 04 . . 3  PILOT WA 635-MD-U: medium-pressure version for recirculation systems