The Aircel HRE/HRS-L Heated Blower Purge Desiccant Compressed Air Dryers utilize atmospheric air for regeneration of the desiccant bed significantly reducing or eliminating the use of compressed purged air for regeneration, resulting in an overall reduction in the cost of operation. No process air is used during this phase of the overall dryer cycle. Process air is only consumed during depressurization and repressurization of the off-line tower and, in the case of the HRE, during cool-down of the regenerated bed. This amounts to an average 2% of the rated capacity of the dryer. The HRS-L dryer further reduces purge air consumption by utilizing ambient air for cool-down of the regenerated bed.

 

1 - 15 of 15 | Results Per Page | View |
1 

Model #

Capacity

Connection ANSI FLG (inches)

Heater kW

Blower HP

Full Load Amps

Dimensions (Inches-HxWxD))

Weight (LBS)

Sort by
N/A 3500 SCFM N/A 6 FLG N/A 90 N/A 15 N/A 130 N/A 135x165x85 N/A 18,798
N/A 3000 SCFM N/A 6 FLG N/A 78 N/A 15 N/A 115 N/A 125x140x85 N/A 16,110
N/A 2500 SCFM N/A 6 FLG N/A 67 N/A 15 N/A 98 N/A 125x140x85 N/A 12,888
N/A 2000 SCFM N/A 4 FLG N/A 52 N/A 10 N/A 77 N/A 125x130x75 N/A 10,740
N/A 1600 SCFM N/A 4 FLG N/A 45 N/A 10 N/A 69 N/A 120x125x70 N/A 8,592
N/A 1200 SCFM N/A 4 FLG N/A 37 N/A 10 N/A 53 N/A 120x105x70 N/A 6,444
N/A 10000 SCFM N/A 10 FLG N/A 280 N/A 25 N/A 340 N/A n/a N/A 53,706
N/A 1000 SCFM N/A 3 FLG N/A 27 N/A 7.5 N/A 44 N/A 120x85x55 N/A 5,370
N/A 800 SCFM N/A 3 FLG N/A 24 N/A 7.5 N/A 40 N/A 105x85x50 N/A 4,296
N/A 8000 SCFM N/A 8 FLG N/A 230 N/A 25 N/A 295 N/A n/a N/A 42,966
N/A 7000 SCFM N/A 8 FLG N/A 200 N/A 25 N/A 275 N/A n/a N/A 37,592
N/A 6000 SCFM N/A 8 FLG N/A 170 N/A 25 N/A 215 N/A n/a N/A 32,220
N/A 600 SCFM N/A 3 FLG N/A 16 N/A 5 N/A 27 N/A 105x85x50 N/A 3,222
N/A 5000 SCFM N/A 6 FLG N/A 120 N/A 20 N/A 172 N/A 150x175x105 N/A 26,850
N/A 4000 SCFM N/A 6 FLG N/A 100 N/A 20 N/A 148 N/A 140x165x95 N/A 21,480
1 - 15 of 15 | Results Per Page | View |
1 

Certifications